Saturday, July 12, 2014

nokia Lumia 710 / 800 / 800C boot repair solution

nokia Lumia 710 / 800 / 800C boot repair solution

nokia Lumia 710 / 800 / 800C boot repair solution
SOLUTION Lumia 710 / 800 / 800C “NOT FLASHING” after TP BOOT REPAIR
Lumia 800 error flashing after boot repair
The solution described below is for phones with “un-alligned” or corrupted AMSS + ADSP Region caused by improper custom firmware flashing or by other means of data corruption.
Here is sample logs showing the error during Normal USB Flashing:
================================================== ======
Sending OSBL Certificate HASH: C72DBA3ABED42215584093FA9DE247381D6062B4
Certificate Size: 452 Bytes

ERROR: Data Rejected at SEQ 0×3
Status : WRITE OSBL CERTIFICATE FAILED
==============================================

STEP 1:

In order to fix this problem, you first need to write QUALCOMM OSBL to your phone via TP Method.

Select Correct Phone Type and make sure M.B.R. + SEC_BOOT + OSBL QCOM is selected as well. Then click REPAIR BOOT!!!

STEP 2:
Remove USB Cable and press and hold POWER BUTTON for 18 Seconds. Then press and hold VOLUME UP Button while connecting the USB Cable to the phone.

*** Your Phone should now be detected as a New HDD Device and Windows will ask you to FORMAT IT… Of course



DO NOT FORMAT
STEP 3:
Download the proper RAW BOOT Files for your phone.Lumia 710 RM-803 and RM-809
Lumia 800 RM-801 and RM-819
Lumia 800C RM-802
STEP 4:
Go to eMMC Direct tab in ATF Software and click “Scan Partitions”. If your phone is NOT DETECTED, go back to STEP 2. Repeat Step 2 until your phone is DETECTED Properly.After ATF Software successfully Lists the Partitions Found on the Phone, click “Backup Phone Data” so you will save your IMEI, Simlocks and other important data safely.

STEP 5:
Now Let us write Boot Files which you downloaded from Step 3.
Extract the RAR file and then write the 3 RAW Boot Files 1 by 1:

5a. dbl_RM-XXX.bin <— Write this to 0x4D – DBL Partition
5b. osbl_nokia
_RM-XXX.bin <— Write this to 0×46 – OSBL Partition
5c. amss_adsp_RM-XXX.bin <— Write this to 0x0C – AMSS_ADSP Partition
5a – DBL

5b – OSBL_NOKIA

5c – AMSS_ADSP

STEP 6:
Click “SP UNLOCK” if you want to unlock your phone after fixing the BOOTS.


STEP 7:
Flash the WP_OS partition using your regular ESCO Flash Files. This will have the same effect as you will flash the phone via USB… but via eMMC Direct, it is faster and does not care if your KEYSTORE is damaged or erased.
Write Flash file to 0×48 WP_OS Partition.
Flash File should be the BOOT file and should be more than 300 MB in size.
It looks like this:
RMxxx_11111_prod_111_11_boot.esco <— 300+ MB


*** WARNING: Everytime you flash your phone with another firmware, you will always RESET the SP Lock status and RESET the SP Lock Counters. To avoid your phone from getting RE-LOCKED, always make sure to UN-CHECK the “XXXXXXX_prod_generic_amss.esco” flash file before you click the FLASH Button. By Skipping this file, you can always re-enter “00000000″ to unlock your phone again after flashing.


Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process

No comments:

Post a Comment